Lifting equipments

Lifting equipment meets the needs of transporting, loading, unloading and lifting goods in warehouses, production workshops, and automotive garages.

The product group includes manual pallet trucks with load capacities from 1 to 2.5 tons, hydraulic engine cranes that lift car engines out of the engine bay with load capacities of 1 to 2 tons, jack stands with multi-level height adjustment to support the vehicle undercarriage when changing tires or inspecting the suspension system, and turtle jacks that lift heavy loads from 6 to 12 tons in confined spaces.

All models clearly indicate maximum load capacity, lifting range and working dimensions so users can select the right equipment for each task. Titania distributes genuine imported lifting equipment from Fervi Italia, guaranteeing clear origin and warranty according to manufacturer standards.

Lifting equipment serves the transport, loading, unloading and lifting of goods in warehouses, production workshops, and automotive garages. This group includes manual pallet trucks, hydraulic engine cranes, load-bearing jack stands, turtle jacks and support accessories such as vehicle ramps and chain lifting hooks. Each type meets specific requirements for load capacity, lifting height and working conditions.

Pallet trucks typically handle loads from 1 to 2.5 tons, suitable for moving goods on pallets in warehouses. Hydraulic engine cranes lift car engines out of the engine bay during maintenance, with load capacities from 1 to 2 tons. Jack stands adjust height in multiple stages, supporting the vehicle undercarriage when changing tires or inspecting the suspension system. Turtle jacks lift heavy loads from 6 to 12 tons in confined spaces.

All models in the group clearly indicate maximum load capacity, lifting range and working dimensions so users can select the right equipment for each task. Compliance with load limits and inspection of hydraulic systems and wheels before each work shift help extend equipment life and ensure occupational safety.

Manual pallet trucks

Manual pallet trucks use a hydraulic mechanism to lift goods from the ground to the required height, then move by manual pushing force. This equipment typically has two lifting forks placed under the pallet, a hydraulic pump integrated into the handle and a load-bearing wheel system. Common load capacities range from 1000 kg to 2500 kg, lifting heights from 63 mm to 200 mm. Some models integrate electronic scales to weigh goods directly on the truck, helping to control weight before transport.

Model 0028 handles 2500 kg load, lifting forks 1150×540 mm, fork thickness 3 mm, lifts from 85 mm to 200 mm. The truck is equipped with four polyurethane wheels that reduce noise and protect the floor. Model 0143-25 handles 1000 kg load, uses a double lifting column to raise goods from 75 mm to 2500 mm, integrates a brake to ensure safety when stopping on slopes. Model 0028R lowers the forks down to 63 mm, suitable for special pallets or low floors. Model 0028B integrates an electronic scale with 2000 kg capacity, display reading of 1 kg, rechargeable battery power, supports tare function to subtract pallet weight. Model 0028BS adds a thermal printer that prints weighing slips directly, convenient for warehouses requiring delivery and receipt records.

Hydraulic engine cranes

Hydraulic engine cranes lift car engines out of the engine bay during repair or replacement. The equipment consists of a foldable steel frame, manual hydraulic pump, lifting hook and mobile wheel system. Load capacities from 1 to 2 tons, lifting ranges from 750 mm to 1280 mm depending on model. The foldable frame saves warehouse space when not in use.

Model 0021-1 handles 1 ton load, working dimensions 1730×1025×1400 mm, folded dimensions 760×760×1635 mm. Two cast iron steering wheels, collapsible lifting mechanism. Model 0021-2 increases load capacity to 2 tons, lifting range 750÷1280 mm, working and folded dimensions similar to the 1-ton model. Model 0063 handles 1 ton load, has two swivel wheels and rear cushion brake, ensuring easy movement and fixation when lifting. All models use manual hydraulic pumps, require no power source, suitable for small garages or sites without electricity.

Height-adjustable jack stands

Jack stands support the vehicle undercarriage when changing tires, inspecting the suspension system or maintaining brakes. The equipment is typically designed as a pair of support legs with locking mechanisms, adjusting height in multiple stages. Load capacities from 2 to 10 tons, heights from 240 mm to 365 mm depending on adjustment stage. Jack stands are placed under the solid support point of the vehicle frame after lifting with a jack, creating a safe working space.

Model 0067 handles 2 ton load, adjusts height through 4 stages: 240, 270, 320, 365 mm. The locking system ensures no slippage under load. Set 0069 consists of two jack stands handling loads from 3 to 10 tons, suitable for trucks or heavy machinery. When using, place jack stands on a hard surface, avoid soft ground or slopes. Always check the locking mechanism before working under the vehicle.

Turtle jacks and specialized lifting equipment

Turtle jacks lift heavy loads in confined spaces, commonly used in mechanical workshops, warehouses or construction sites. The equipment has a low initial height, lifts loads using hydraulic or mechanical mechanisms. Load capacities from 6 to 12 tons, suitable for lifting machinery, containers or steel structures.

Model 0654-xL handles loads from 6 to 12 tons, compact dimensions allow placement under heavy loads without requiring large clearance. Turtle jacks are typically combined with jack stands or support frames to hold the load at the required height after lifting. In addition, the group includes S024 engine hook support frame handling 500 kg load, height adjustable from 1190 mm to 2000 mm, adjustment range 205 mm, length from 730 mm to 1480 mm. This equipment suspends the engine during removal and installation, reducing load on the main crane.

Lifting and transport support accessories

Support accessories include vehicle ramps, chain lifting hooks, lifting arms and folding platforms. These devices expand the application capabilities of the main lifting system, helping to handle various situations in warehouses and workshops.

Ramp set R015 handles 2.5 ton load, made of rubber to wedge vehicle wheels, creating a slope to guide the vehicle to the repair or maintenance position. Chain lifting hook AN2G-12-1 has two steel suspension arms, chain diameter 12 mm, length 1000 mm, handles 2600 kg load at 30 degree angle and 2100 kg at 90 degree angle. Lifting arm 0236 handles 300 kg load, arm length 750 mm, slot distance 380 mm, section 45×45 mm, weight 6 kg. Folding platform P019 made of anti-slip aluminum, overall dimensions 1260×380×500 mm, handles 150 kg load, suitable for various activities in homes, garages and other fields. Telescopic magnetic lifter 111622 extends from 125 mm to 630 mm, head diameter 7 mm, lifting capacity 500 g, chrome-plated, convenient for picking up small metal objects in narrow gaps.

Selection by load capacity and working conditions

Load capacity is the most important factor when selecting lifting equipment. A 1000 kg pallet truck is suitable for light warehouses, wooden or plastic pallets containing electronic components. A 2500 kg truck handles metal pallets, cement bags or chemical containers. A 1-ton crane is sufficient for passenger car engines, a 2-ton crane is necessary for truck engines or industrial machinery. A 2-ton jack stand is used for passenger cars, a 10-ton stand is used for heavy trucks.

Lifting height affects stacking and access capabilities. Standard pallet trucks lift 85÷200 mm, sufficient for moving pallets on the ground. High-lift trucks such as S2-800 lift from 85 mm to 800 mm using a pulling mechanism, handle 1000 kg load, forks 1170×540 mm, polyurethane wheels, allowing goods to be stacked on low shelves or work tables. Floor conditions are also important: polyurethane wheels reduce noise and protect epoxy floors, cast iron wheels handle higher loads but are noisier on concrete floors.

Maintenance and safe use

Inspect the hydraulic system before each work shift: oil leaks, pump pressure, smoothness of release valve. A leaking hydraulic pump reduces lifting force and creates danger under load. Check wheels: cracks, tire wear, stuck bearings. Damaged wheels cause the truck to veer off course or fail to move under heavy load.

Do not exceed the load capacity marked on the equipment label. Overloading deforms lifting forks, damages the hydraulic pump or breaks the frame. When lifting with an engine crane, always use straps or chains with appropriate load capacity, hook onto the solid lifting point of the engine. When using jack stands, place on a hard surface, lock firmly before working under the vehicle. Do not use jack stands as the sole support point, always combine with a jack or auxiliary support frame. Store equipment in a dry place, avoid moisture that causes steel frame rust and hydraulic seal damage. Lubricate wheel axle bearings and joints periodically to reduce friction and extend service life.

The lifting equipment group provides diverse solutions for transport, loading, unloading and maintenance in industrial and commercial environments. Selecting the right model according to load capacity, lifting height and floor conditions helps optimize work efficiency and ensure occupational safety.