Pneumatic tools

FERVI pneumatic tools bring together 32 item codes serving car garages, mechanical workshops and woodworking shops. The bolt-tightening group ranges from 3/8" to 3/4" square drives, with AP01 reaching 542 Nm, AP02 reaching 678 Nm and AP04 up to 1085 Nm at a speed of 7300 rpm.

A screwdriver with a 1/4" hex drive, the 0044 impact wrench set with 13 pieces and the 0046 angle-head set with 65 Nm of torque support tight positions. The nailer and stapler lines work at 5-7 bar, using nails of 10÷50 mm and staples of 15÷35 mm.

The range also includes 500 cc and 1000 cc grease guns, air blow guns, drying guns, car-wash foam sprayers in the 2-6 bar range, along with an electronic tyre pressure gauge. The item codes are imported from Italy and distributed as genuine goods, with specifications given on each detail page.

The pneumatic tools in this group comprise 32 FERVI item codes, serving car garages, mechanical and woodworking workshops. The range spans impact wrenches with 3/8", 1/2" and 3/4" square drives, through to screwdrivers with a 1/4" hex drive. The pneumatic nailer and stapler group covers nails of 10÷50 mm and staples of 15÷35 mm. The air blow gun, drying gun and car-wash foam sprayer lines use a compressed air supply in the 2-6 bar range.

Alongside these are 500 cc and 1000 cc grease guns, an oil dispensing gun and an electronic tyre pressure gauge. An air mover and a hand-held rust removal gun add support for cleaning and surface treatment work. Most item codes operate at a pressure of 6 bar, equivalent to 90 psi. The air inlet of the nailer group uses a 1/4" thread. Torque ranges widely, from 65 Nm on the angle-head set up to 1085 Nm on the 3/4" square drive wrench.

No-load speeds are recorded from 4800 rpm to 10000 rpm depending on the model. Weight varies from 0.22 kg on the aluminium-bodied blow gun to 4.7 kg on the 3/4" impact wrench. Users should check the specifications on each item page before ordering. The sections below are arranged by function, helping to narrow down choices more quickly. Every item code links directly to its detail page with technical specifications.

Pneumatic impact wrenches and screwdrivers

The bolt-tightening group accounts for most of the item codes in this product range. The models are distinguished by square drive size, torque and no-load speed. The 3/8" square drive suits smaller bolts, 1/2" is common in garages, and 3/4" is for heavy loads. Buyers choose according to the socket sizes already on hand and the torque level required. The common working pressure specification is 6 bar.

The PROFESSIONAL SERIES line uses a composite body with a handle and head covered in shockproof rubber. AP06 and AP01 allow reversing and speed adjustment with one hand. AP01 uses a 3/8" square drive with 542 Nm of torque. AP02 has a 1/2" square drive, a short 110 mm body and 678 Nm of torque, suiting tight positions.

AP03 runs at 7300 rpm with a 1/2" square drive. AP04 uses a 3/4" square drive, a speed of 7300 rpm and torque up to 1085 Nm for industrial maintenance and trucks. 0786 also uses a 3/4" drive with 950 Nm at a pressure of 6 bar. 0052 reaches 680 Nm at a speed of 4800 rpm and weighs 4.7 kg.

In the lighter range, 0576 uses an aluminium 1/2" body, 7000 rpm, 435 Nm, with an average air consumption of 150 L/min. 0045 gives 320 Nm at 7000 rpm and weighs 2.3 kg. 0573 uses a 3/8" drive and turns at 10000 rpm. 0571 uses a 1/2 inch square drive. 0047 drives screws with a 1/4 inch hex drive and has a reverse function.

Two complete sets help shorten equipping time. 0044 includes 13 pieces with a 1/2 inch square drive, together with black sockets from 9 to 27 mm and an extension bar. Everything is housed in a dedicated case. 0046 includes 16 pieces in 1/2", uses an angle head and delivers 65 Nm of torque. The angle-head design allows access to narrow gaps that a standard wrench finds hard to reach.

Nailers, staplers and riveters

The fastening group serves packaging, timber framing and interior finishing. The pneumatic machines here work in the 5 - 7 bar range with a 1/4" threaded air inlet. Specifications to check include magazine capacity, nail or staple length, overall dimensions and weight. There are also hand-operated options without compressed air for occasional work.

0586 holds 110 nails, uses Serie 0584 nails of 10÷50 mm, weighs 1.5 kg and measures 245 x 225 x 55 mm. C586 holds 120 nails in the same 10÷50 mm range and weighs 1.3 kg. F588-6 uses Serie 0588 staples of 15÷35 mm, with a capacity of 195 and a weight of 1 kg. All three come with a carrying case.

0585 holds 80 staples of 10 mm width, works at 5 - 7 bar and measures 245 x 230 x 55 mm. C589 drives nails of ø 2.5÷4.1 mm, head ø 6.3÷8.7 mm, length 38÷90 mm, and weighs 0.5 kg. 0149 is a hand-held staple gun supplied with 500 staples. 0453 sets rivets up to Ø6.4 mm using a 400 mm lever arm.

Air blow guns, drying guns and surface cleaning

Blow gun nozzles are used to remove dust, metal chips and moisture after machining. They draw air directly from the compressor, so their construction is compact and light. Points to review include the working pressure range, body material, nozzle size and weight. This group also covers chemical foam spraying and an air mover for enclosed spaces.

0725 uses a compressed air supply below 6.5 bar, weighs 146 grams and handles dirt on machine moulds and electronic equipment. 0412 has a plastic handle and blows away dust and light contaminants. W021PA runs in the 2-6 bar range, with an aluminium body, a weight of 0.22 kg and a 2.0 mm nozzle. 0607 adds a further option for air blowing and cleaning.

W021PN creates chemical foam using compressed air, with an aluminium alloy body and a steel tank of 900 ml capacity. 0059 removes rust at a speed of 3500 BPM, consumes 135 l/min, works at 6 bar and weighs 1.5 kg. FB20AM3AB-K delivers an air flow of 2.56 m³/min, an air speed of 63.5 m/s, a speed of 0 to 18000 rpm, and combines suction and blowing.

Lubrication, oil dispensing and tyre pressure checking

Routine maintenance work calls for an additional lubrication and checking group. Grease guns are used on grease nipples on machinery and vehicle undercarriages. The oil dispensing gun supplies oil at high flow rates. The electronic gauge supports quick tyre pressure readings. The item codes below differ in capacity, material and connector type.

0677-500 is hand-operated, with a metal body and a PVC flexible hose, a capacity of 500 cc, and can be filled with loose grease or standard cartridges. 0677 has a capacity of 1000 cc, a flexible hose of Ø 9 x 450 mm, and uses Ø 55 mm grease cartridges. 0474-PE has an aluminium body, a flow rate of 60÷120 l/min, a Ø 25 mm nozzle and a 1" BSP inlet thread. 0125 measures tyre pressure digitally, with a backlit display.

You can open each item page to view the full specifications before choosing. If you need advice based on the pressure of your existing compressor, please contact the technical team.